Thin fronts - EXPANDO T
This new fixing method is impressively easy to use. Fronts are assembled in just a few steps. Drill, insert and tighten screws. That's it. And to make things even easier, the same fixing system can be used for three different applications: wall cabinets, doors and pull-outs.
Assembly, adjustment and removal
To fix EXPANDO T, drill a hole of 10 mm in diameter and just 6 mm in depth. Boss drilling is no longer required for hinges, so the new fixing method produces a new drilling pattern. Fixing positions stay the same for lift and box systems.
Tighten screws and that’s it
|Application areas and assembly recommendations|
|Materials tested by Blum||Minimum tightening torque (Nm)|
|Chipboard (transverse tensile strength > 0.4 N/mm²)||1.5|
|MDF (transverse tensile strength > 0.6 N/mm²)||1.5|
|Natural stone - Nero Assoluto granite||3|
|Artificial stone – quartz composite||3|
EXPANDO T assembly
Disclaimer of liability
Blum accepts no liability for the use of EXPANDO T in combination with materials not listed or fittings from other manufacturers. It is recommended that assembly be carried out by an experienced furniture manufacturer.