SERVO-DRIVE flex for built-in appliances

Whether for left or right opening, sliding or fixed doors, SERVO-DRIVE flex can be installed in any installation situation so there's no reason to go without the convenience of SERVO-DRIVE even for your built-in refrigerator, freezer or dishwasher.

Thanks to an integrated wireless receiver, two different drive units are automatically synchronised on tall doors. And the hold-open times can be set on the drive itself.

SERVO-DRIVE flex can be installed with ease – in just a few steps without any electrical knowledge. Start-up is quick and if ever something needs to be done, the system is easily accessible. All you need to do is unclip the blind front over the installation recess.

Large and heavy doors, such as those on refrigerator and freezer cabinets, move by means of two wirelessly synchronised drive units.

An optional SERVO-DRIVE switch on the front, which increases the trigger range, is recommended for refrigerators. This means that no matter where you touch it the door will open smoothly and reliably.

If the dishwasher is built in, the drive unit for SERVO-DRIVE flex is installed in the centre in the installation recess.

If the door is not opened after the opening support system has been triggered, the rod pulls it shut again. This prevents it from being accidentally left open – especially useful for refrigerator doors.

The rod only triggers the opening action when pressure is applied to the front and retracts into the drive unit after opening. The door remains open and the work area remains clear.

The lean protection feature prevents unintentional opening of the front, because SERVO-DRIVE can differentiate between a brief touch and a long leaning action.