< SERVO-DRIVE flex | Blum


Easy assembly and installation

SERVO-DRIVE flex can be installed quickly and simply. You can easily unclip the cover of the installation recess if you need to access the drive unit again at a later stage.

Assembly, adjustment and removal

Attach mounting plate

Screw mounting plate to left or right side of the installation recess.

Clip on drive unit

Clip drive unit to left or right mounting plate and connect to mains.

Mount the front

Clip front panel (with attachments) to mounting plates.

Carry out reference run

The drive unit adjusts itself to the installation situation during the reference run. SERVO-DRIVE flex is now ready for use.

Installation instructions

Assembly video


This video shows the steps required for assembly and installation of SERVO-DRIVE flex and, optionally, the additional assembly of the SERVO-DRIVE switch.

Assembly Devices

Blum offers a wide range of drilling and insertion machines, assembly devices and templates to ensure that the assembly of Blum products is accurate, quick and easy. Achieving optimal performance requires precise assembly.

 Go to Assembly Device Selector

 Open catalogue

Troubleshooting guide

Are you experiencing difficulties during the installation or operation of SERVO-DRIVE? If so, you will find possible causes and troubleshooting solutions here.

To the troubleshooting guide