Thin fronts - EXPANDO T
This new fixing method is impressively easy to use. Fronts are assembled in just a few steps. Drill, insert and tighten screws. That's it. And to make things even easier, the same fixing system can be used for three different applications: wall cabinets, doors and pull-outs.
Assembly, adjustment and removal
To fix EXPANDO T, drill a hole of 10 mm in diameter and just 6 mm in depth. Boss drilling is no longer required for hinges, so the new fixing method produces a new drilling pattern. Fixing positions stay the same for lift and box systems.
Tighten screws and that’s it
|Application areas and assembly recommendations|
|Materials tested by Blum||Minimum tightening torque (Nm)|
|Chipboard (transverse tensile strength > 0.4 N/mm²)||2|
|MDF (transverse tensile strength > 0.6 N/mm²)||2|
|Natural stone - Nero Assoluto granite||3|
|Artificial stone – quartz composite||3|
EXPANDO T assembly
Disclaimer of liability
Blum accepts no liability for the use of EXPANDO T in combination with materials not listed or fittings from other manufacturers. It is recommended that assembly be carried out by an experienced furniture manufacturer.
Would you like to find out more about EXPANDO T? This brochure provides all the information you need for implementation.