TANDEMBOX intivo

Helping you plan, use and market TANDEMBOX intivo

Downloads

Folder

Box systems: Your requirements - our box solution

PDF | 367 KB | 12-15-2021

International design awards

PDF | 290 KB | 02-27-2023

Installation instruction

TANDEMBOX intivo drawer - installation instruction

PDF | 1 MB | 07-13-2023

TANDEMBOX intivo high fronted pull-out with BOXCAP - installation instruction

PDF | 2 MB | 07-17-2023

TANDEMBOX intivo high fronted pull-out with BOXCOVER and design elements - installation instruction

PDF | 3 MB | 07-17-2023

TANDEMBOX intivo inner drawer - installation instruction

PDF | 2 MB | 07-17-2023

TANDEMBOX intivo inner pull-out - installation instruction

PDF | 2 MB | 07-17-2023

TANDEMBOX intivo SPACE CORNER - installation instruction

PDF | 787 KB | 07-17-2023

Poster / bill-board

International design awards

PDF | 48 KB | 06-27-2018

Specification texts

Design elements for TANDEMBOX intivo - ID20154

PDF | 435 KB | 12-06-2023

TANDEMBOX intivo, BLUMOTION Drawer, height M (Space requirement 98.5 mm), load bearing class 30/65 kg - ID20030

PDF | 463 KB | 12-06-2023

TANDEMBOX intivo, BLUMOTION Drawer, height N (Space requirement 82.5 mm), load bearing class 30 kg - ID20028

PDF | 462 KB | 12-06-2023

TANDEMBOX intivo, BLUMOTION High fronted pull-out with BOXCAP, height D (Space requirement 224 mm), load bearing class 30/65 kg - ID20038

PDF | 427 KB | 12-06-2023

TANDEMBOX intivo, BLUMOTION High fronted pull-out with BOXCOVER, height D (Space requirement 224 mm), load bearing class 30/65 kg - ID20034

PDF | 428 KB | 12-06-2023

TANDEMBOX intivo, BLUMOTION Inner drawer, height M (Space requirement 106 mm), load bearing class 30/65 kg - ID20032

PDF | 463 KB | 12-06-2023

TANDEMBOX intivo, BLUMOTION Inner pull-out with BOXCAP, height D (Space requirement 224 mm), load bearing class 30/65 kg - ID20040

PDF | 428 KB | 12-06-2023

TANDEMBOX intivo, BLUMOTION Inner pull-out with BOXCOVER, height D (Space requirement 224 mm), load bearing class 30/65 kg - ID20036

PDF | 429 KB | 12-06-2023

TANDEMBOX intivo, TIP-ON BLUMOTION Drawer, height M (Space requirement 101.5 mm), load bearing class 30/65 kg - ID20226

PDF | 467 KB | 12-06-2023

TANDEMBOX intivo, TIP-ON BLUMOTION Drawers, height N (Space requirement 85.5 mm), load bearing class 30 kg - ID20225

PDF | 462 KB | 12-06-2023

TANDEMBOX intivo, TIP-ON BLUMOTION High fronted pull-out with BOXCAP, height D (Space requirement 227 mm), load bearing class 30/65 kg - ID20230

PDF | 432 KB | 12-07-2023

TANDEMBOX intivo, TIP-ON BLUMOTION High fronted pull-out with BOXCOVER, height D (Space requirement 227 mm), load bearing class 30/65 kg - ID20228

PDF | 433 KB | 12-06-2023

TANDEMBOX intivo, TIP-ON BLUMOTION Inner drawer, height M (Space requirement 109 mm), load bearing class 30/65 kg - ID20227

PDF | 467 KB | 12-06-2023

TANDEMBOX intivo, TIP-ON BLUMOTION Inner pull-out with BOXCAP, height D (Space requirement 227 mm), load bearing class 30/65 kg - ID20231

PDF | 433 KB | 12-06-2023

TANDEMBOX intivo, TIP-ON BLUMOTION Inner pull-out with BOXCOVER, height D (Space requirement 227 mm), load bearing class 30/65 kg - ID20229

PDF | 434 KB | 12-06-2023

Assembly videos

TANDEMBOX intivo BOXCOVER with design element

This video demonstrates the simple and tool-free assembly process for the TANDEMBOX intivo design element, which is connected to the drawer side via BOXCOVER. (Variant 1)

TANDEMBOX intivo design element with BOXCOVER – for delicate fronts

Instead of sliding on the BOXCOVER (variant 1), it can also be clipped on for delicate fronts. (Variant 2)

TANDEMBOX intivo height adjustment

You get a perfect gap design with just a few turns of the hand. The height, side and tilt adjustment can be easily performed in the drawer side cutting under the cover cap. This video shows the steps required for height adjustment.