TANDEMBOX intivo

Assembly, adjustment and removal

BOXCAPs are simply clipped onto the drawer side. Design elements are also mounted without tools. Just slide a BOXCOVER over the top of the design element and that’s it.

When you clip the front into the front fixing bracket it will click into place. Hey presto! The drawer or pull-out is complete.

Height, side and tilt adjustment have been integrated into the drawer side so they are easily accessible from the outside. You can also detach the front via the aperture in the drawer side.

Assembly instructions

TANDEMBOX intivo drawer - installation instruction

PDF | 1 MB | 07-13-2023

TANDEMBOX intivo high fronted pull-out with BOXCAP - installation instruction

PDF | 2 MB | 07-17-2023

TANDEMBOX intivo high fronted pull-out with BOXCOVER and design elements - installation instruction

PDF | 3 MB | 07-17-2023

TANDEMBOX intivo inner drawer - installation instruction

PDF | 2 MB | 07-17-2023

TANDEMBOX intivo inner pull-out - installation instruction

PDF | 2 MB | 07-17-2023

TANDEMBOX intivo SPACE CORNER - installation instruction

PDF | 787 KB | 07-17-2023

Assembly videos

TANDEMBOX intivo BOXCOVER with design element

This video demonstrates the simple and tool-free assembly process for the TANDEMBOX intivo design element, which is connected to the drawer side via BOXCOVER. (Variant 1)

TANDEMBOX intivo design element with BOXCOVER – for delicate fronts

Instead of sliding on the BOXCOVER (variant 1), it can also be clipped on for delicate fronts. (Variant 2)

TANDEMBOX intivo height adjustment

You get a perfect gap design with just a few turns of the hand. The height, side and tilt adjustment can be easily performed in the drawer side cutting under the cover cap. This video shows the steps required for height adjustment.

TANDEMBOX intivo inner pull-out with cross gallery

This video demonstrates the simple and easy assembly steps required for the TANDEMBOX intivo inner pull-out with the cross gallery.

TANDEMBOX intivo inner pull-out with design element

This video demonstrates the simple and easily assembly steps required for a TANDEMBOX intivo inner pull-out with a design element.

TANDEMBOX intivo side adjustment

You get a perfect gap design with just a few turns of the hand. The height, side and tilt adjustment can be easily performed in the drawer side cutting under the cover cap. This video shows the steps required for side adjustment.

TANDEMBOX intivo tilt adjustment

You get a perfect gap design with just a few turns of the hand. The height, side and tilt adjustment can be easily performed in the drawer side cutting under the cover cap. This video shows the steps required for tilt adjustment.

TANDEMBOX intivo – BOXCAP assembly

This video demonstrates the simple and tool-free assembly process for BOXCAP when using TANDEMBOX intivo. (Variant 1)

TANDEMBOX intivo – BOXCAP assembly for delicate fronts

Instead of sliding on the BOXCAP (variant 1), it can also be clipped on before front assembly. (Variant 2)

TANDEMBOX intivo – ORGA-LINE assembly

The ORGA-LINE inner dividing system for TANDEMBOX intivo is easy to install. This video shows you how.

TANDEMBOX intivo – removing/replacing the design element

This video demonstrates the individual steps required for replacing the design element.

Assembly devices

Blum offers a wide range of drilling and insertion machines, assembly devices and templates to ensure that the assembly of Blum products is accurate, quick and easy, for optimal performance requires precise assembly.

Go to Assembly Device Selector

Open catalogue